How to save electricity in an apartment

Today's electricity saving issue is very relevant.Public utilities are very valuable, so many families grab the head when the next account comes.It seems that the computer does not work in vain, the house is turning off the light when leaving the room, household appliances are rarely used.But payments every time just increases, what to do?It is necessary to study all aspects, after which it is clear to follow the suggestions.Consider the main features.

Features -Energy Conservation Features in the apartment

1. Household appliances not only work in normal mode, but also "sleep".These include water heaters, microwaves, equipment (video and audio), chargers, all kinds of tools, split systems, computers and so on.
2. When the device does not work, they are in standby mode.This, in turn, is still using electricity.To avoid cost increases, turn off the device from the outlet if you don't use it.
3. Comprehensive tools where sleep mode uses 10% of electricity from the amount of utility indicators.If you make all the values, you pay more for easy.

Use household equipment properly

Iron

1. In the case of iron, everything is easy.Start ironing things immediately after turning on the device, leaving it gradually heating the desired sign and doing your function.
2. Turn off the iron 10 minutes before the end of the manipulation.The only device will remain hot for the whole period, you will complete the setting according to the principle of heat heat.
3. Try to dry the underwear by 95%, the remaining 5% give iron.If things are too much, the device needs more effort to process and knead all the folds.You, therefore, spend a lot of electricity.
4. Rejecting old household appliances, giving priority to modern iron with automatic closing functions.When heated to a certain temperature, the indicator is turned off, so the electricity is stored.
5. Select the Iron Mode taking into account the type of fabric.If you process hemp or cotton, do not manipulate at too low temperatures.You will spend more time and electricity, and the folds will not be completely removed.

Vacuum cleaner

1. In order for a vacuum cleaner to take electricity according to the declared indication, it is necessary to shake the dust and clean the existing filters.
2. If you ignore this advice, household devices will exceed the allowed indicator of 20-30%.Vacuum cleaners will work with less efficiency, but more energy consumption.
3. Household appliances like these use the most light when they turn off and turn on.Therefore, try not to turn off the vacuum cleaner after processing each room.Pull it behind you in work conditions.

Washing machine

1. This home device accounts for 15% of electricity costs.Learn the manufacturer's suggestions, use all the functions of your washing machine.
2. Choose not one and a half hours of mode, but the economic and fast washing program.Fill the drum tightly, but avoid the load.In the second case, household appliances spend 10% more electricity.
3. Not all things need to be washed at 50-60 degrees.Speaking program with lower temperatures and spin -up.Properly choose washing technology (very dirty things, light cleaning, etc.).

Disposal System (Air Conditioning)

1. The room cooling system "eats" a lot of electricity, so they need to use it more often.If possible, set the maximum power 3 times a day and cool the room this way.
2. Families with small children cannot place too low temperatures, so try to cool the apartment in court.Before turning on the air conditioner, make sure the windows, windows and doors are tightly closed.Eliminates cracks that may pass the warm air from the road.
3. Before buying a breakdown system, measure a room where the air conditioner will be installed.It is also important to consider the number of people in the room.Do not take equipment with high or low power.Give priority to the choice in the middle.
4. Don't forget about the service planned by the air conditioner.Carry out filters, cartridges and fans on schedule.Frequently fill in special compartments with liquid as it evaporates.

Computer

1. Today, personal computers are available in almost every home.This is not surprising, as the age of technological advances leaves a sign in society.
2. The PC uses a lot of electricity, which significantly increases the average utility bill.The brightness of the monitor spends a lot of light.If there is no need for a strong indicator, reduce it to an acceptable sign.
3. If you do not use the computer for 1-2 hours, do not wait for the equipment to turn off automatically.Set the PC for sleep mode or decide it at all.
4. If you need to use a scanner, modem or printer with the birth of the service, connect the peripheral device using a network filter.Always turn off the device if they are not needed.
5. Displaying new liquid crystals spent less electricity than its predecessor.If possible, go to the monitor or use a laptop (they use 30% lower light).

Refrigerator

1. Even children have basic skills using refrigerators.There is nothing complicated in this, but adults make a lot of mistakes during household appliances.
2. For example, it is not recommended to place the refrigerator on the bright side of the kitchen, near the heating device and radiator, next to the gas or electric kitchen.
3. If there are heat sources nearby, the refrigerator will start sunbathing from them.The camera, in turn, will try to keep the mark at the right level.This will lead to high cost of light.
4. It is also important to adhere to the temperature sign in the kitchen.Optimal mode is a 19-21 degree indicator.It is this temperature that will allow the refrigerator to function without unnecessary effort.
5. Do not ignore basic rules for technical care.Running defrost, free camera from strong ice sheets.Change the rubber seal at the door so that the refrigerator is always sealed.
6. Never move the technique close to the wall, such steps will slow down the air circulation, the refrigerator will sunbathe.Do not buy large devices if your family needs are not so high.He spends a lot of light and is in vain.

Heating device

1. The most powerful "eater" electricity includes heaters.To reduce the amount of energy used, it is necessary to protect all windows, doors, floors, walls and so on.
2. Of course, the double windows that perfectly separate the heat.But wooden frames pass to most (about 50%).Place all cracks with regular paintings or tape, protecting the windows with cotton wool.Similarly, it is necessary to close the door tightly.
3. If the central heating is inserted, but the room is still cool, wash the pipe.You can also change the battery with a new one or "build" some extra parts.With this result, there is no need to turn on the heater.
4. In the case when the heater literally "eats" your family's budget, learn to use other heat sources.Their role can be dry for towels (they are connected to hot water) or gas burners.In the second case, you should constantly monitor the amount of gas and periodically move the room.

Electric Savings Tips

1. Wipe the chandelier.Make sure the incandescent bulbs and plafons are clean.If the dust will always accumulate on it, the room lighting will fall.You will start to include more and more light, increasing your spending.Clean chandeliers are much more efficient to spread light, so you can use lower power incandescent lamps.
2. Wash the window.Perform window winding as often as possible.Clean glasses will allow sunlight to penetrate the apartment, so you will cost it natural.From here the need to use electricity in large quantities will be lost.In addition, the sun will warm the room in the winter.
3. Mix the lighting device.Do not use just the "top" light if you have to work on the table in the far corner of the room.Mix chandeliers with floor lamps or desktop lamps.If the top light involves 3-5 lamps, remove the excess, leaving 2 pcs.
4. Use modern devices.To date, there are many devices that work to save electricity.These include motion sensors (light turns on and off automatically), infrared tractors, light regulators with smooth changes in lighting, digital switches, pulsating relays.
5. Change the bulb.Conventional incandescent lamps take 5-8 times more electricity than their fluorescent, compact and LED brothers.Replace all bulbs at home with energy.Such a step will be true, as you can save about 40% a year in your account.
6. Turn off the "extra" light.Take the habit of turning off the lights when leaving the room.Agree with households, from now on you have introduced the saving mode.This does not mean that you have to sit in the dark for hours.There is no need to illuminate the room where no one is.This is especially true for children, the younger generation is not worried about age family estimates.
7. Boil water properly.If you need to heat the liquid on the kitchen, pour hot water.Cover the dish with a lid and tear to the desired mark.In this case, the bottom of the dish should be in contact with the burner.For the kettle, do not fill the entire cavity with water.Boil as much liquid as needed to burn 2-3 cups of tea.Pour the residue of hot water into the thermos, then drink.

Watch how you use household appliances.Tips out of the phone's phone, do the same as the microwave, slow cooker, coffee maker.Do not install the refrigerator next to the radiator, boil water in a small kettle.